3.
On a computer, connect to the secure network name on the sticker (You can
change these details later.) Select the option to automatically connect to this
network in the future. You will not have Internet access until you complete modem
router setup.
∗
For wired setup, connect one end of the provided Ethernet cable to your
computer’s Ethernet adapter and the other end to an Ethernet port on the
back of the modem router.
Repeat step 2 for each additional computer or device that you want to
connect to the modem router.
Note--If your computer’s Ethernet adapter is not set up, refer to the
Ethernet adapter’s documentation for more information.
4.
Open a web browser and type http://192.168.1.1 in the address bar.
5.
Enter ‘‘admin’’ in both the Username and Password fields then click Log in.
7
To Next Page
Loading...
