Mute
Pressing the <Mute> button on the remote
mutes the output. Releasing the mute action is
either by pressing <Mute> again or by pressing
the volume buttons. Please note: the mute
function is not available for the line source.
Select
Pressing the <Select> button subsequently
changes the input source of the SATIE. Inputs
USB, AES (symmetric digital input), Coax1, Coax2,
optical (Toslink) and the line input are
selectable.
Mute + Select
Pressing <Mute> first to enter the mute mode
and thereafter <Select> lets you change the filter
setting of digital filter. 6 options are available
through FIR (default) to HYBRID
Volume - , Volume +
The volume control works simultaneously for
both analog and digital inputs. The control
range spans from -85 … +10dB in increments of
0.75dB.
To Next Page
Loading...