Digital Filter selection (cont.)
Hybrid, fast roll off minimum phase.
Display
Some users prefer to have a dimmed listening
ambience where the light from the display
could perturb the tranquillity. When first
powering up the SATIE, the display will be on for
20s before going in to sleep mode. Pressing any
of the remote control buttons lights up the
display for at least 10s, before going dark again.
Whenever (digital inputs only) the input data
stream changes, the display indicates
automatically the type of data stream (DSD or
PCM) and the sample rate.
Fixed mode
Every time, the SATIE is turned on, all major
settings are restored as they were before
placing SATIE in stand by mode. However, the
restored volume setting will be no higher than
40, to prevent excessive high play back levels
To Next Page
Loading...