Lionelo Amber - Car Seat and Carrycot Installation; Assembling Car Seat with Adapters; Carrycot Folding and Assembly; Mounting Carrycot onto Stroller

‑ 12 ‑EN
HOW TO ASSEMBLE CAR SEAT
(APPLIES TO 3in1 SET)
The adapters are compable with the following products:
Lionelo (Astrid, Mari Carrier, Greet Carrier)
1. Car seat parts are presented in g. 21.
2. Slide adapters in relevant stroller frame spots unl you can hear a click and
connectors are locked up. Pay aenon to R and L marks.
3. Put the car seat in stroller frame unl you can hear a click and adapters are
locked up (g. 22).
4.
To detach the car seat when necessary, disconnect the car seat from adapters.
5. Press the buon (g. 23) to remove the connector from stroller frame.
6. A suitable assembly is presented in g. 24.
HOW TO FOLD AND ASSEMBLE CARRYCOT
The child can be transported in the carrycot (g. 30).
1. Carrycot parts are presented in g. 25.
2. Put metal bars into carrycot brackets (g. 26), as showed in g. 26A.
3. Hide side bars by fastening Velcros (g. 27).
4. Put the maress base and maress into the carrycot (g. 28).
5. To fold the carrycot, detach Velcros covering side bars of the carrycot (g.
29A) and pull out metal bars from carrycot brackets (g. 29).
How to assemble carrycot on stroller
1. Slide in adapters standing out of carrycot in relevant spots on stroller frame
unl you can hear a click. Push the carrycot as showed by arrow in the
gure (g. 31).
2. Suitable assembly is presented in g. 32.
3. To disassemble the carrycot, press both release buons at a me (g. 33)
and li the carrycot (g. 34).
How to clean and maintain
1. To ensure the longevity of the product, it is advisable to clean the stroller
frame, wheels and exible parts with a preservave grease.
2.
Remove dust and sand from the wheels and stroller frame regularly. You can
clean these parts with a wet cloth and so washing agent.