Lionelo Annet Plus - Page 7

‑ 7 ‑ EN
How to lock wheels (4):
A. Set front wheels straight and then press down the lock. The wheels will stop
rotang. Li to unlock it.
B. Parking device: press to lock the stroller. Li to unlock it.
How to assemble the bow-shaped handle (5):
A. Push the guides of the bow-shaped handle inside the grips.
B.
Press the bow-shaped handle unl you can hear a click. Fasten the extra
crotch strap on the bow-shaped handle. The addional crotch strap must
always be fastened with the bow-shaped handle.
C. Press the buons located from the inside to release locks and remove the
bow-shaped handle.
How to unfold the canopy (6):
Pull the canopy forward to unfold it.
How to adjust footrest and backrest (7):
A. Footrest adjustment: Press buons on both sides of the footrest and li it
or slide down, as desired, then release buons. The correct posion will be
indicated by a click.
B. Backrest adjustment: Li the lever in the back of the backrest, next adjust
the backrest and release the lever.
Belt height adjustment (8):
To adjust length of belts, pull them through relevant loops in the seat so that they
correspond to child’s height.
How to use safety belts (9):
Join the belt (A) and the belt (B) together with a quick coupling. Do the same on
the other side. Insert the belt connector (C) in the handle (D). Do the same on
the other side. To adjust the belts, slide the adjustment handle (E) up or down
by ghtening or releasing the belt. To disassemble safety belts, slide the buckle
through the opening in the seat. To assemble, put the safety belts back again.
Seat belts must be used from birth.