Lionelo Cora - Product Features and Operation; Product Description; How to Assemble the High Chair; How to Assemble and Disassemble the Tray

‑ 6 ‑EN
Product descripon (g. 1)
1. Backrest adjustment lever
2. Tray folding key
3. Main chair folding key
4. Seat height adjustment levers
5. Front wheel brakes
6. Footrest inclinaon adjustment
key
7. Tray adjustment lever
8. Five-point safety belts
9. Tissue pocket
10. Rear wheels
11. Supporng leg
How to use
How to assemble the high chair
1. Take the chair out of the box. Keep the wrapping out of reach of children (g. 2).
2. Insert legs in the corresponding spot on the chair frame. If you can hear
a „click”, it means the assembly has been successful (g. 3).
3. Keep the chair with one hand, and push the frame with rear wheels with
the other hand. If you can hear a „click”, it means the assembly has been
successful (g. 4).
How to assemble and disassemble the tray
Assembly: Pull the adjustment lever (7) and then insert the tray into the chair
frame holes (g. 5). Release the adjustment lever. Check if the tray has been xed
securely and does not pull out.
Disassembly: Pull the adjustment lever (7) and pull the tray out.
How to adjust the product
1. Tray: Pull the adjustment lever (7) and set the tray in one of two posions.
Make sure there are no red indicators on the frame (visible in g. 12) - this
posion is for folding the tray only.
2.
Footrest: To set the top posion, li the footrest only. If you can hear
a „click”, it means the higher posion has been secured properly. To lower
the footrest, slide both footrest adjustment keys (6) and set it in one of three
available posions (g. 6).
3.
Five-point safety belts: connect shoulder belts to hip belts as showed
in the g. 7. When combined, insert the belts into the belt buckle. If
you can hear a „click”, it means the belts have been fastened properly.
To undo the belts, press the buon on the buckle. Shoulder belts must be