The stroller is equipped with a front wheel turning locking
system. To activate it, set the front wheels to the forward
direction, and then slide up the lock between the wheels.
Move the lock down so that the wheels can be turned again.
Insert the left and right clasp into the main buckle. You
should hear a “click sound” indicating that the belts have
been properly fastened.
In order to unfasten the safety belts, press the button on the
middle of the buckle and pull the clasps out.
Belts length adjustment Move the clasps on the right and
left belt to adjust the length.
Move the brake down to lock the
wheels.
Move the brake up to unlock the
wheels.
strap clasp strap clasp
strap adjustment
clasp
strap adjustment
clasp
main buckle
rear brake
button
To Next Page
Loading...
