Lionelo Levi One - How to adjust the product; Height of child safety seat belts; How to adjust belts tension

‑ 9 ‑ EN
I. Child safety seat cover
J. Belt tension adjustment buon
K. Seat liner
L. Belt tension adjustment
M. Headrest height adjustment
N.
Product belt height adjustment
holes
O. Car seat guide
P. Child safety seat belt connector
How to adjust the product
Child safety seat belts
A. Height of child safety seat belts
The children from group I (9-18 kg) must be secured with safety belts of the child
safety seat. For other groups, these belts must be detached.
The height of the child safety seat belts must be adapted to the child’s height:
see g. 4.
a – too low b – too high c – correct height
The height of the child safety seat belts can be set in three posions. To change
height:
1.
Loosen the child safety seat belts (see below: How to adjust the belt tension).
2. Remove the belts from the connector (P, g. 5).
3. Take the belts out through the hole in the backrest and through the child
safety seat cover (N).
4. Set the belts at the desired height by carrying them through one of three
holes in the cover and backrest.
5. Insert the belt ends into the connector (P).
6.
Make sure the belts have been inserted into the connector correctly and
are not twisted.
B. How to adjust belts tension
To loosen the child safety seat belts: press the adjustment buon (J) and pull the
shoulder belts (g. 7).
To ghten the child safety seat belts up: pull the adjustment belt (L).
Note! Make sure the child safety seat belts t ght the child’s body and are not
twisted. Make sure the hip belts go low and secure the child’s pelvis. The belts
must t ght the child’s body but must not be too ght and cause discomfort.