Lionelo Mell - Page 11

‑ 11 ‑ EN
LIST OF PRODUCT PARTS (FIG. A)
CONTROL PANEL (FIG. B)
REMOTE CONTROL (FIG. C)
BATTERY REPLACEMENT (FIG. D)
1. To replace the baeries, open the baery compartment with a Phillips screwdriver
(not supplied).
2.
Place 4 AA type 1.5V baeries into the compartment. Ensure correct baery
polarity (+ and -).
3. Close the compartment and ghten the screw.
MAINS SUPPLY (FIG. E)
To use the product connected to the mains power supply, connect the cable to the
port located on the main module of the rocker and to the adapter (g. E) and then
to an electrical outlet.
MOUNTING
Note! Installaon can be performed only by an adult.
1. Main module
2. Bracket
3. Lower frame element
4. Upper frame element
5. Cover
6. Mounng element x4
7. Base element x2
8. Toy bar
9. USB cable
1. On/o switch
2. Rocking speed
3. Sounds of nature (water)
4. Melodies
5. Sounds of nature (birdsong)
6. Automac moon detecon
7. Timer (15 / 30 minutes)
8. Indicator lights
1. On/o switch
2. Baery input
3. Baery lock (must be removed
before use)
4. Bluetooth switch
5. Automac moon detecon
6. Rocking speed
7. Sounds of nature (birdsong)
8. Increase volume
9. Next melody
10. Melody on/o switch
11. Previous melody
12. Decrease volume
13. Sounds of nature (water)
14. Timer (15 / 30 minutes)