• Do not transport any persons or objects on the unit during work
or transport on the road!
• Only work with completely protected drive, i.e. joint shaft with
complete shaft protection and supplementary protection on
tractor and unit. Make sure the joint shaft connections engage
safely!
• Attach the holding chain of the joint shaft in order to avoid a
rotation of the joint shaft protection.
• Do not, for any reason, climb onto the machine during operation!
• Do not act with any objects on the machine during operation!
• Never use the machine without the roller or stone retaining grid
panels, since these provide protection to the machine against
rotating tools!
• When adjusting the rollers, always turn off the tractor engine and
carry out such adjustments in conditions of absolute safety!
• When carrying out work on the machine, it should be placed on
level ground or on a stable support! When working with the unit
lifted, always secure the unit mechanically by means of adequate
supporting elements!
To Next Page
Loading...