Installation manual Konstanz DC 1/25 Version 8.0 Last update: 2/15/10
Key word directory.......................................................................................................…. 1
Pre-conditions.............................................................................................................….. 2
Transport and interim storage...................................................................................…… 3
Setting supports ...........................................................................................................… 3
Setting up track....................................................................................................…….. 4
Fastening of track supports......................................................................................…. 5
Example of upper and lower stopping points .............................................................. 6
Fastening of track wall (concrete (B25), steel, other)..................................………… 7
Fastening of the Halfen track-wall...........................................................................…. 8
Rotate roller heads, drive the track to the platform...................................................…… 9
Connect track parts with one another....................................................................….. 10
Potential equalization....................................................................................................... 11
External command giver................................................................................................... 11
Loading devices................................................................................................................. 11
Set stopping points...................................................................................................…... 13
Overrun fuse........................................................................................................……… 14
Screwing of the roller sets.....................................................................................……. 14
Sensitive surfaces under the platform frame.................................................................… 15
Track paneling and fall protection…..............................................................………….. 16
Shunt switch bar..............................................................................................………… 17
Concluding work and instruction of the operator ........................................……………. 17
Disassembly...................................................................................................................... 18
Notes about disposal........................................................................................................ 18
Appendix I: Maximal dimensions for assembly........................................................... 19
Appendix II: Free-standing supports (on the foundation).......................................... 20
Appendix II: Caught supports (on steps).............................................................…… 20
Recommendation for pin selection KONSTANZ........................................................ 21
Loading forces............................................................................................................…. 24
Key word
Page
To Next Page
Need help?
General
