Lippert Components Better Bath 300 Series User Manual

Rev: 05.27.2016
Page 3
Better Bath® 300 Series Wall Surround Installation Manual
Care and Cleaning Instructions
LCI Thermoforming units are easy to keep clean and sparkling. Simply use warm water and a mild soap
solution. Rub with a soft cloth and rinse thoroughly with warm water. Do not use abrasive cleaners or harsh
chemicals.
Recommended Cleaners: Mild soap and water, Fantastic Spray Cleaner, Top Job Liquid (3% solution), Spic
and Span Pine Cleaner, Joy Liquid Detergent (5% solution), Gel-Gloss, “The Works” Tub and Shower Cleaner,
DuPont 7 Auto “Polish,” and DuPont 606S Auto “Polish.” All cleaning should be followed by a warm water
rinse.
Do Not Use: Disinfectant sprays, disinfectant foams, pine oil cleaners, citrus-based cleaners, abrasive
cleaners, harsh chemicals, Scrubbing Bubbles, petroleum-based products, auto rubbing compounds or
industrial or commercial cleaners.
If any adverse chemicals, as described in the Care and Cleaning Instructions,
come in contact with any surface, immediately rinse thoroughly with clean
water.
With the exception of Permalux® and Permalux Plus® products, fading or discoloration may result from
continued exposure to direct sunlight. Keep blinds or drapes closed during periods of the day when the
product is exposed to direct sunlight.
Do not place any hot objects or objects such as candles or cigarettes on the surface of this product. These
objects may scar, burn or ignite this plastic.

Lippert Components Better Bath 300 Series Specifications

General

Brand	Lippert Components
Model	Better Bath 300 Series
Category	Speakers
Language	English