Lippert Components Tire Linc 2.0 - Page 10

Rev: 09.27.21 Page 10 CCD-0004071
B. The app will automatically detect the Tire Linc system.
NOTE: If necessary, follow the online prompts to set up Tire Linc within the OneControl BT app.
2. The smart phone will connect to the repeater and the app will display a caravan image with tyre
pressures and temperatures.
3. With the OneControl BT app running, real-time tyre event notifications (Fig. 19) will be sent to the
smart phone.
4. Tap the notification to be taken to the TPMS screen in the OneControl BT app to see which tyre(s) is/are
experiencing an event.
5. Tap the readout button (Fig. 20A) of a tyre to launch its properties window. Within the selected tyre’s
properties window, various tyre and sensor specifications can be observed and altered (Figs. 21 and 22).
A. Last data received — posts the date and time the app last received tyre monitoring system
information.
B. Pressure — posts the currently- sensed pressure of the selected tyre.
C. Temperature — posts the currently sensed temperature of the selected tyre.
D. Battery Level — posts the current battery voltage of the sensor’s battery.
Tyres that have high or low air pressure can cause unforeseen detrimental eects on tyres and
the unit, including undesirable tread wear. Tyres should always be pressurized to within the
manufacturer's recommendations.
Fig. 19
Fig. 20
A
E. Minimum/Maximum Pressure — posts the currently programmed minimum and maximum
pressure limit for the selectedtyre.
F. Maximum Temperature — posts the currently programmed maximum temperature limit for the
selected tyre.
G. Maximum Temp Change — posts the currently programmed maximum +/- temperature change
limit for the selected tyre.