Lippert Components Tire Linc 2.0 - Stem Sensor Pairing Sequence

Rev: 09.27.21 Page 7 CCD-0004071
Stem Sensor Pairing Sequence
The pairing sequence for Stem Sensors (Fig. 13) is as follows:
1. SINGLE AXLE: Stem Sensors for a single-axle caravan MUST be paired in the following order: Left
Front (Fig.14A) and Right Front (Fig.14C).
2. DOUBLE AXLE: Stem Sensors for a double-axle caravan MUST be paired in the following order: Left
Front (Fig.14A), Left Rear (Fig.14B), Right Front (Fig.14C) and Right Rear (Fig.14D).
Front
Rear
Fig. 13
A
B
C
D
Fig. 14