Rev: 10.18.21 Page 14 CCD-0004098
11. Located towards the top of the ramp door, secure the curbside front panel bottom leg (Fig. 25A) into
the keeper (Fig. 25B) by pushing the compression latch lever (Fig. 25C) towards the coach, slide the leg
into place and release the lever.
Fig. 26
A
A
Fig. 27
A
Fig. 28
Fig. 25
A
B
C
12. If applicable, engage the J-Bolt (Fig. 3) on the driver's side of the patio railing.
13. For the driver's side patio railing, fold the front panel and gate (Fig. 26A) over towards the top of the
ramp door.
14. Lift the patio railing up into a 90 degree position (Fig. 27A).
15. Swing the driver's side front panel and gate in towards the center of the ramp door (Fig. 28A).
16. Located towards the top of the ramp door, secure the driver's side front panel bottom leg (Fig. 25A)
into the keeper (Fig. 25B) by pushing the compression latch lever (Fig. 25C) towards the coach, slide
the leg into place and release the lever.
To Next Page
Loading...