Rev: 10.18.21 Page 19 CCD-0004098
16. Utilize a person to support the ramp door while another person releases the door cables (Fig. 47A) from
the retainer pins (Fig. 47C) from the door cable brackets (Fig. 47B), on both sides of the ramp door.
NOTE: Leave the retainer pin (Fig. 47C) on the door cable or in the door cable bracket on the door so the
retainer pin does not get lost.
A
B
C
Fig. 46
Fig. 47
A
B
C
14. Attach the snap (Fig. 46A) that holds the front panel to the curbside railing.
15. Attach the curbside rear bungee cable (Fig. 46B) to the footman loop (Fig. 46C) located on the door jamb.
To Next Page
Loading...