Lippert 3000 Series - Page 10

Rev: 08.18.21 Page 10 CCD-0004099
1. If applicable, release the rear bungee (Fig. 12A) attached to the footman loop (Fig. 12B) on the door jamb
(Fig. 12C) for both sides of the patio rail kit and gently lower the patio railings to the surface of the door
(Fig. 12D).
Fig. 12
B
A
C
D
Fig. 13
2. Attach the front bungees (Fig. 13A) onto the front driver's side and curbside brackets (Fig. 13B),
holding the patio railings to the ramp door.
A
B