Lippert 3000 Series - Page 25

Rev: 08.18.21 Page 25 CCD-0004099
4. Located towards the top of the ramp door, release the driver's side front panel bottom leg (Fig. 62B) from
the keeper (Fig. 62C) by pushing the compression latch lever (Fig. 62A) towards the trailer, slide the leg
out of the keeper and release the lever.
NOTE: Alternate versions of the Lippert 3000 series will have a spring plunger (Fig. 63A). Turn the lever
(Fig. 63B) towards the trailer, and release the driver's side patio rail leg.
5. For the driver's side patio railing, swing the front panel and gate (Fig. 64A) out in-line with the side
patio railing (Fig. 65A).
Fig. 62
Fig. 63
Fig. 64
A
Fig. 65
A
A
B
C
A
B