Lippert 3000 Series - Page 7

Rev: 08.18.21 Page 7 CCD-0004099
Fig. 7
A
C
B
8. Raise a side patio panel assembly up into a 90 degree position (Fig. 7A).
Fig. 8
A
9. If applicable, locate the bungee on either side of the patio railing (Figs. 6B, 6C or 8A), on the outside
rear of the patio railing closest to the door jamb.
10. Place the hook of the bungee (Fig. 8C) onto the footman loop (Fig. 8B).
11. Repeat steps 8-10 for the opposite side patio panel assembly.