6
lippert.com 432-LIPPERT (432-547-7378) Rev: 06.15.22
SureShade
®
Power
Bimini Upgrades: Fly
Extension
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0004538
16. Retrieve the previously-removed (step 7) jaw screw
(Fig.11A) and use it to secure the eye end of each stanchion
(Fig.11B) onto a jaw slide (Fig.11C).
Fig.12
A
B
C
17. Locate the stanchions:
A. Position each swivel stud for insertion into the locking
plate (Fig.12).
Fig.13
stanchion
swivel stud
locking plate
B. Place the locking plates (Fig.13A) as far forward on the
top rails towards the front of the boat without interfering
with any obstructions, e.g., doors, furniture.
C. The stanchions should be positioned at a forward
angle so when the locking plates are installed a
forward and downward tension will be applied to the fly
extension (Fig.13).
Fig.11
stanchion
front (bow)
A
boat railing
front
bimini
frame
actuator
To Next Page
Loading...