7
lippert.com 432-LIPPERT (432-547-7378) Rev: 06.15.22
SureShade
®
Power
Bimini Upgrades: Fly
Extension
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0004538
D. Use a tape measure and a non-permanent marker
to make sure each locking plate is located the
same distance, between 98”-108” from the front of the
actuator body (Fig.14).
NOTE: Installing the slide base closer to 108” will provide
better stretching of the fly extension’s fabric and better
clearance under the canopy.
E. Position the locking plates where previously located in
steps B-D.
98”-108”
measurement points
Fig.14
To Next Page
Loading...