Lippert SureShade Power Bimini 2021013744 - Page 8

8
lippert.com 432-LIPPERT (432-547-7378) Rev: 06.15.22
SureShade
®
Power
Bimini Upgrades: Fly
Extension
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0004538
F. Insert two ¼”-10 x ¾” Phillips head self-drilling screws
(Fig.15A) into the locking plates (Fig.15B) to attach the plates
to the boat railings.
Fig.15
G. Reinsert the stanchions into their locking plates (Fig.16).
Fig.16
18. With stanchions locked in place at the front of the boat,
install adjustable tie-down straps as follows:
Fig.17
A
B
boat
railing
Fig.18
A. If necessary, clip the adjustable buckle end of the
tie-down straps to the saddle on the stanchion (Fig.17A).
B. Pair the other end of the tie-down straps (Fig.18A)
with loose saddles (Fig.18B) then move them towards the
front of the boat. Adjust the tie-down straps for length
if necessary.
C. Using a non-permanent marker, mark the location of
the saddles’ mounting holes.
A
buckle
stanchion
saddle
A
B
boat railing
A
boat railing
stanchion