Lippert SureShade Power Bimini - Table of Contents; Introduction

Rev: 07.06.21 Page 2 CCD-0003657
TABLE OF CONTENTS
Introduction 2
Safety 3
Resources Required 4
Preparation 4
Installation 4
Installing Actuators 4
Wiring Actuators 9
Mounting Actuators 10
Installing Stand-os 11
Installing Helm Switch 13
Installing Front Strut 13
Final Assembly 15
Wiring Diagram 17
Operation 17
Helm-mounted Control Switch 17
RF Remote Control Installation - Optional 18
Resources Required 18
RF Receiver Installation 18
RF Remote Control Operation - Optional 20
Key Fob Remote 20
Notes 21
Introduction
The SureShade Power Bimini is an electric actuator-driven Bimini top powered by a 12V DC source,
controlled by a helm-mounted momentary switch or an optional RF remote control system.
For information on the assembly or individual components of this product, please visit:
https://support.lci1.com/marine-products/ .
Note: Images used in this document are for reference only when assembling, installing and/or operating
this product. Actual appearance of provided and/or purchased parts and assemblies may differ.