Lippert Thomas Payne Seismic Theater Seating - Console and Seat Integration

4
lippert.com 432-LIPPERT (432-547-7378) Rev: 02.16.22
Seismic Theater
Seating
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0004325
3. The seat back is fully installed when the clips (Inset
Fig.3C) on the back of seat back (Fig.3D) slide down over the
bottom brackets (Fig.3A) on the seat base (Fig.3B) and click
into place.
Fig.3
A
B
A
D
D
inset
C
4. Determine placement for Seismic Theater Seating and
place the center console (Fig.4, Fig.5) in the middle of the
designated space.
A. Right-Hand Seating - Move the right-hand seat (Fig.6)
to the right-hand side of the console (Fig.4) Slide the
brackets on the bottom inside of the right-hand seat
(Fig.6A) on top of the brackets on the bottom of the inner
console (Fig.4A).
B. Left-Hand Seating - Move the left-hand seat (Fig.7) to
the left-hand side of the console (Fig.5). Slide the brackets
on the bottom inside of the left-hand seat (Fig.7A) on top of
the brackets on the bottom of the inner console (Fig.5A).
Fig.4
Center Console - Right-Hand Seating
Fig.5
Center Console - Left-Hand Seating
A A
A
A