Lippert Thomas Payne Seismic Theater Seating - Cords and Electrical Connections; Connecting Power Adapters to Seats

5
lippert.com 432-LIPPERT (432-547-7378) Rev: 02.16.22
Seismic Theater
Seating
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0004325
Cords and Electrical Connections
1. Locate the plastic bag in the furniture box with the cords
for connecting power to the left and right theater seating to
a wall outlet.
2. Remove the cords for the bag and lay out for correct
identication.
A. Electrical plug (qty. 2) (Fig.8A) plugs into the AC adapter
(Fig.8B).
B. The AC adapter (qty. 2) (Fig.8D) plugs into the back
lower corner of each seat (Fig.9C).
NOTE: Do not plug the seating plugs (Fig.8C) into a wall
outlet until all connections have been made between right-
and left-hand seating and console.
C. Electrical plug (Fig.8C) plugs into a wall outlet.
Fig.6
Right-Hand Seating
A
A
Left-Hand Seating
A
A
Fig.7
A
B
C
D
Fig.8