©2021 Liquid Instruments Visit liquidinstruments.com or email support@liquidinstruments.com for assistance.
Moku:Go Layout
Moku:Go
Quick Start Guide
Powering On & O
Connect the magnetic power supply to the magnetic power adaptor on your Moku:Go. The device will turn on
automatically when it is connected to power.
X
To turn your Moku:Go o, unplug the power supply.
Installing The Moku:Go App On Your Computer
Download the Moku:Go Application
for your Windows or Mac computer
from liquidinstruments.com/
resources/software-utilities/windows-
mac-app/.
Windows: Run the installer and follow
the prompts to install the application.
Mac: Drag the icon to your applications
folder to install.
Status LED
Moku:Go's status LED indicates the
current device mode. The LED is o
when the power is disconnected. Once
the power is connected, it is in one of
the four states, shown on the right.
Color
• •
On Booting Ready
Blinking
Recovery mode Firmware update
To Next Page
Need help?
General
