LiteOn EVO 6800 Series - Page 105

102
Parameter
Name
Description
Setting Range
63: External Speed Search Command
65: DC Braking
69: Drive Enabled
74: S7 is set to pulse input or PWM
75: Reset automatic operation program
E1-08
Terminal
command mode
0: Two-line / Three-line mode 1
1: Two-line / Three-line mode 2
Default: 0
Range: 0 to 1
E1-09
DI Digital
Filtering Time
Digital Filtering Time
Default: 5 ms
Range: 0 to 500ms
E2: Multi-Function Digital Output
E2-00
Relay 1 Function
Selection
0 : During Run
1 : Zero Speed Holding
2 : Frequency (Speed) Agree
3 :User-Defined Frequency (Speed ) Agree
4 : Drive Ready
5 : Uv (Undervoltage) Detection
6 : During Baseblock
7 : Retain
8 : Frequency Command Source
9 : Frequency Command Loss
10: Run Command Source
11 : Fault
12 : Communication Mode
13 : Alarm
14 : Fault Restart
15 : Timer Output
16 : Frequency (FOUT) Detection 1
17 : Frequency (FOUT) Detection 2
18: Overvoltage/ Undervoltage Detection 1
(normal open)
20: Overvoltage/ Undervoltage Detection 2
(normal open)
22 : During Reverse
23: Motor 1/ 2 Selection
24: During Regeneration
25 : During Restart
Default: 11
Range: 0 to 52 / 100
to 152
E2-01
Relay 2 Function
Selection
Default: 0
Range: 0 to 52 / 100
to 152
E2-02
D1-DC Function
Selection (Open
Collector)
Default: 1
Range: 0 to 52 / 100
to 152