15
2.2 Receiving Checklist
Check the following when receiving the drive:
1. Is the packaging box in good condition? Any damage or damp ?
If so, contact the distributor or local Lite-On representative.
2. Is the model label on the box same as what you purchased?
If not, contact the distributor or local Lite-On representative.
3. After opening the box, is there any damp mark inside the box? Any damage or crack on
the drive enclosure?
If so, contact the distributor or local Lite-On representative.
4. Does the drive nameplate show the same model number as the carton label?
If not, contact the distributor or local Lite-On representative.
5. Are the manual and keypad in the carton?
If not, contact the distributor or local Lite-On representative.
2.3 Nameplate
Applicable motor rating
Input power supply
Output power supply
To Next Page
Loading...
