18
USE A
PHILLIPS-HEAD
SCREWDRIVER
Feet for mounting
board and shoes
Connect to servo
mount with included
#6 screws
a24 SERVO MOUNT
MEET THE ACCESSORY
The servo mount lets you
attach your servo to a
mounting board (includ-
ed) or a pair of littleBits
shoes (not included.) It’s
a great way to keep the
servo steady so the arm
can go wild.
HOW IT WORKS
Push the servo in from the
side until it clicks into place.
To keep the servo from
sliding up and down, use
the included screws and a
Phillips-head screwdriver.
If you’re having trouble
using the servo with your
Arduino Bit, check out
littleBits.cc/troubleshoot/ack
To Next Page
Loading...