LiveLife Watch - Location and Do Not Disturb; Requesting Watch Location; Do Not Disturb Scheduling

2021.1
SMS Commands 2022.1
SMS Commands
LiveLife Watch
3
© Copyright 2022. LiveLife Alarms
loc
After you send command loc
watch will search for its
location using Bluetooth, WIFI
and GPS signal in that order.
If it nds the watch via
Bluetooth it will not search
for a WIFI or GPS signal.
SMS Command
Request location of watch (using all methods)
Description
Reply from watch Location by GPS:
Date: 05/08/2022
Loc Time: 04:09:22
Speed: 0km/h
Battery: 56%
maps.google.com/maps?q=
loc:-41.286460,174.776236
loc.gps
After your send command
loc.gps watch will search for
its location via GPS signal only.
Bluetooth and WIFI will
be ignored.
SMS Command
Request location of watch (using GPS only)
Description
Reply from watch
Now:
Date: 05/08/2022
Time: 04:09:22
Speed: 0km/h
Battery: 56%
maps.google.com/maps?q=
loc:-41.286460,174.776236
Explanation
Watch will only search for its
GPS location for a maximum
of 3 minutes. If the GPS
current location (watch is
perhaps indoors ) cannot be
found it will return its last
known GPS location.
ND<n>,<start time>,<end time>
<n> <start time> <end time>
Value range: 0~1 Value range: Value range:
0 - no disturb o 00:00~24:00 00:00~24:00
1 - no disturb on
SMS Command
No disturb
Description
Reply from watch
Example:
ND1,19:00,06:00 reply:
No disturb from 19:00 to 6:00 ok.
ND0 reply:
No disturb o.
No disturb setting
When the No disturb setting is turned on all features will work except the voice alerts will be disabled.