EasyManua.ls Logo

Livongo HT900 - Page 9

Livongo HT900
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
USER GUIDE 10
6. Position the cuff’s edge about an inch
(2-3 cm) above the elbow.
7. Align the Ф marker (located to the right of
tube exit) with the center of your arm.
Ф
8. Tighten the cuff evenly around your arm by
pulling on the end — make sure the Ф marker
stays aligned with the center of your arm.
9. Wrap the end of the cuff over your arm to secure
it in place. Don’t make it too tight — allow a
nger to t between the cuff and your arm.
1 inch (2–3 cm)