This document describes the Livoo Hair Brush Styler, a device designed for domestic hair styling. It emphasizes user safety, proper operation, and maintenance to ensure satisfactory and trouble-free use.
Function Description
The Livoo Hair Brush Styler is an electrical appliance primarily used for styling hair. It functions as a hairbrush and styler, likely combining the actions of brushing and applying heat or airflow to shape hair. The device is supplied with three interchangeable styling attachments, suggesting versatility in achieving different hairstyles or targeting various hair lengths and types. Its core function is to provide users with a tool for personal hair styling in a home environment.
Usage Features
The styler offers several features to enhance its usability and performance:
- Voltage Compatibility: Before use, it's crucial to verify that the wall outlet voltage matches the rated voltage of the appliance. This ensures safe and correct operation.
- Speed Settings: The appliance includes a speed button with three positions: "O" for OFF, "1" for Low speed, and "2" for HIGH speed. This allows users to adjust the airflow or heat intensity according to their styling needs and hair type.
- Quick Drying: The manual states that users can use the fastest speed to dry hair and the lowest speed to style it, indicating its dual capability for both drying and styling.
- Attachment System: The device comes with three interchangeable styling attachments that can be easily snapped onto the appliance and disconnected by pressing a release button. This modular design allows for different styling effects.
- Root Styling: For styling hair from the roots, users are advised to wind a thin streak of hair around the chosen accessory and carefully unroll it, suggesting a method for adding volume or shaping close to the scalp.
- Cool-Down Function: After use, or when changing attachments, it's important to allow the appliance to cool down. The manual mentions an "after use, push speed button downward (OFF)" action, which might also serve as a cool-down or power-off procedure.
- Overheat Protection: The styler is equipped with overheat protection. If the appliance overheats, it will switch off automatically. Users must then allow it to cool for 6 to 15 minutes before it can be used again. This safety feature prevents damage to the device and potential hazards.
- First Use Procedure: Before the very first use, it's recommended to let the appliance run for approximately 3-5 minutes. During this initial period, a slight odor may be emitted due to the manufacturing process, which is harmless and temporary.
- Temperature Control: The appliance should not be subjected to temperatures below 10°C and above 35°C, indicating optimal operating conditions.
- Safety in Bathroom Environments: While the hairdryer can be used in a bathroom, it must be unplugged after use due to the inherent hazard of water proximity, even when switched off. An additional protection measure, the installation of a residual differential current (DDR) system in the bathroom's electrical circuit, is advised for enhanced safety.
Maintenance Features
Maintaining the Livoo Hair Brush Styler is straightforward, focusing on cleanliness and careful handling to prolong its lifespan and ensure safe operation:
- Cleaning:
- Thoroughly clean the appliance after each use.
- To clean, pull the mains plug from the socket.
- Clean the different parts of the appliance with a damp cloth.
- It is important to keep the air inlet free from hair and lint to prevent blockages and maintain performance.
- Never immerse the appliance in water or any other liquids for cleaning.
- Storage:
- After cleaning, store the appliance in a cool, dry place.
- To hang the appliance, use the power cord loop provided.
- Ensure the cable is not pinched in cupboard doors or pulled over hot surfaces, as this can damage the cable insulation.
- Cable Care:
- Regularly check the cable for damages, defective, or porous locations before each use.
- Never wind the cable around the appliance to avoid breaks.
- The cable must not be twisted, pulled, kinked, or wound around the dryer. If it becomes twisted, untwist it before use.
- Always pull the mains plug from the socket when not using the appliance for a longer period, before cleaning, or if a disturbance occurs.
- General Inspection:
- Only use the appliance when it, its cable, and plug show no signs of damage. Never use a defective appliance.
- Never attempt to repair a defective appliance yourself; always refer to a competent qualified electrician or the after-sales department.
- Unsupervised Use: Do not leave the device unsupervised when not in use.
- Object Insertion: Never insert any object into the device.
The manual strongly emphasizes safety warnings, particularly concerning water proximity and electrical shock, highlighting the importance of unplugging the device after use in bathrooms and never touching it with wet hands. It also advises against using the styler on artificial hair due to the danger of fire from high temperatures.
Need help?
General
To Next Page