6
User’s manual
EN
IDENTIFICATION OF MANUFACTURER AND APPLIANCE
The data plate shown is applied
directly onto the appliance. It
contains references to information
which is essential for safely
operating the machine.
A–Manufacturer Identifi cation.
B–CE conformity label.
C–Serial model/number and
manufacturing year.
D–Technical specifi cations.
REQUESTING TECHNICAL ASSISTANCE
For any technical requirement, please contact the Technical service centre of the Manufacturer
or an authorised centre.
For technical assistance, indicate the data reported on the data plate, the approximate operating
hours and the type of fault detected.
(C) Manufacturing year
(C) Model
(B) CE conformity
label
(A) Identification of manufacturer
(D) Technical
specifications
(C) Serial number
DATA PLATE
To Next Page