To Next Page
B
Brian ProctorAug 8, 2025
Why doesn't the room temperature match the new setting on my LK Armatur Temperature Controller?
- AAaron ButlerAug 8, 2025
It typically takes a few hours, possibly up to 24 hours, for the room temperature to match the new setting on your LK Armatur Temperature Controller. You should also verify that the heating boiler or storage tank is set to the correct temperature and that the circulation pump is working. Ensure the radiator and shut-off valves are open, power is supplied, and fuses are intact. Additionally, confirm the mixing valve turns easily, the actuator is properly installed on the mixing valve axle, and there is no air in the system. Finally, check that the control system is correctly installed, the disengaging button is in the automatic position, and that the heating system installation was done correctly and can be operated manually.
General