Light Electronic Control LCE Manuale Utente
Light control manual-ITA-neutro_03.docx Rev. 04 IT 5 / 6
firmware 2.4
1.1. Variabili utente:
MODBUS Tipo: HOLDING REGISTER
Commando di lettura: 03 (03Hex)
Commando di scrittura: 16 (10Hex)
Indirizzo
Scrittura/Lettura
Modbus protocol controller address
Modbus baud rate protocol
3= 9600 baud (default)
4= 19200 baud
5= 38400 baud
6= 58600 baud
7= 115200 baud
Modbus parity protocol
1= EVEN (default)
2= NONE
3= ODD
Indirizzo
Scrittura/Lettura
3 Point Valve Cooling
Proportional Band
3 Point Valve Heating
Proportional Band
Fan Auto:
Differential Medium Speed
Fan Auto:
Differential Maximum Speed
Heater Post Ventilation Time
Cambio modo:
0 = Cool; 1 = Heat; 2 = Auto
Stato On Off (Memorized into
EEprom)
0 = Off; 1 = On
Controllo ventilatore
0 = Min; 1 = Med; 2 = Max; 3 =
Auto
Profilo 1: Inizio banda 1
Profilo 1: Inizio banda 1
Profilo 1: Inizio banda 2
Profilo 1: Inizio banda 2
Profilo 1: Set Banda Freddo 1
Profilo 1: Set Banda Caldo 1
Profilo 1: Set Banda Freddo 2
Profilo 1: Set Banda Caldo 2
Profilo 2: Set Banda Freddo
Profilo 2: Set Banda Caldo
Profilo 1: Set Banda Caldo 1
Profilo 1: Set Banda Freddo 1
Profilo 1: Set Banda Caldo 2
Profilo 1: Set Banda Freddo 2