LOBSTER Elite - Operating Instructions and Remote Control; Remote Control Functions; Drills and Play Style Drills

OPERATING INSTRUCTIONS CONTINUED
Drills
Each of the six custom designed court drills consists of six sequential shots in a
designated pattern combining court location, ball speed, and spin. To adjust
difficulty the feed rate can be changed from 2-9 seconds by pressing the /
SETTINGS buttons. Low feed settings will have a short pause between cycles.
PLAY STYLE DRILLS
– Six ball drill that utilizes the full back court with different types of spin.
– Six ball drill that utilizes the full back court with little spin and more
ball speed.
– Six ball drill that utilizes both the front and back court with some top
spin and less ball speed.
LE
OPERATING INSTRUCTIONS - REMOTE CONTROL
Remote Control
The remote consists of eleven buttons and allows you to operate many of the
functions on your ball machine from a distance.
• Press the REMOTE button located on the control panel to activate the
remote. When the LED is lit the machine will accept commands from your
remote controller.
• The red Play/Pause button will start and stop the machine at any time.
• Press the Random button to activate the fully random function.
• Press Sweep multiple times to scroll through the short, mid, and deep settings
for the sweep function.
• Press the 2-line button multiple times to scroll through the narrow, medium,
and wide settings for the 2-line functions.
• Press the Drills button to scroll though the pre-programmed drills.
•
The six black buttons are used to change shot parameters on the fly for the presets.
• Speed – Adjust the ball speed for 2-line, oscillation and manual presets.
• Spin – Adjust the top or bottom spin for 2-line, oscillation and
manual presets.
• Feed – Adjust the ball interval for manual and all presets.
Using the remote while a drill is running will cause the next shots parameters to
change. Doing so may cause shots to land in unplayable areas.
Grinder
Power Baseliner
All-Courter