Need help?Do you have a question about the Locosys GW-60 and is the answer not in the manual?
General| Water Resistance | IPX7 |
|---|---|
| GPS | Yes |
| Heart Rate Monitor | No |
| GNSS | GPS, GLONASS |
| Sensors | Accelerometer |
Charge the device fully for 3-4 hours before operation.
Navigate through Clock, Alarm, Stopwatch, and Timer modes using MODE/BACK.
Press ADJUST/ to enter the setting page.
Press GPS to enter GPS mode for automatic signal search.
Hold MODE/BACK for 2 seconds to activate the backlight.
Lock the screen by pressing START+MODE; unlock by pressing again.
Hold GPS for 1 sec to enter sleep mode; watch enters sleep automatically after 15 sec idle.
Optimized power saving function; enters deep sleep after 10 days of inactivity.
Displays local time based on GMT and synchronizes with GPS UTC time.
Adjust alarm time and set numbers using ADJUST/ and / buttons.
Start, pause, and reset the stopwatch function.
Adjust, start, pause, and restart the timer function.
Use ADJUST/ to enter/confirm and MODE/BACK to exit/cancel.
Clear top speed records or traveled distance.
Enables power saving by turning off LCM after 15 sec of inactivity.
Configure the buzzer sound to be On or Off.
Configure the log rate (OFF, 1HZ, 5HZ, SMART) based on speed.
Set speed for logging, 0 to 15 [UNIT].
Select unit for speed measurement (KM, MI, NM).
Set GMT/Time zone from GMT-12:00 to GMT+13:00.
Configure time interval for N-second speed averaging, 1-60 sec.
Configure time interval for M-second speed averaging, 1-60 sec.
Set minimum speed for auto-speed reports.
Select speed display type: SPEED, MAX, NSEC, MSEC, etc.
Configure speed result windows, split screen, and big font.
Option to include "DISTANCE" screen in speed report.
Option to include "TIME" screen in speed report.
Set unit for distance measurement (KM, MI, NM).
Set scroll seconds in speed report, 1 sec to 2.5 sec.
Select USB connection type (COM or UMS) for PC utility.
Connect to USB to enter Mass Storage Class mode for data transfer.
Enable or disable the option to display the screen upside down.
Choose time display format: 12H (AM/PM) or 24H.
View device status including firmware version and serial number.
Displays current or N-sec average speed with accuracy indicators.
Displays N-second average speed reports, with big font option.
Displays top results for each run, with big font option.
Display position, velocity, and time data with page navigation.
Graphical display of available satellites, tracked satellites, and DOP.
Displays satellite number and C/No values in a bar chart.
Steps to connect the device to the PC, ensuring the USB driver is installed.
Click "Settings" to configure username, UTC offset, and log interval.
Select "Log Data" to view log info and download data in SBP format.
Convert SBP files into PLT, CSV, KML, and GPX formats.
Link with Google Earth Viewer to display travel trajectory.
Click "Download" to retrieve TOP 10 Speeds in SBP file.
Click "Browse" to view logged data and link items to Google Maps.
Click SBP records or converted files on Google Earth to view map data.
Details on the 12-month warranty period and coverage limitations.
Information on repair costs and procedures for out-of-warranty products.
Guidance on contacting local dealers and visiting the website for support.
To Next Page