Do you have a question about the Lodge & Shipley Model A and is the answer not in the manual?
Swing Over Bed | 16 inches |
---|---|
Distance Between Centers | 30 in, 54 in |
Spindle Bore | 1.75 inches |
Spindle Speeds | 12 |
Spindle Speed Range | 25 - 1200 rpm |
Headstock lubrication, spindle bearing adjustment, and temperature limits.
Operation of the friction clutch and changing spindle speeds.
Operation and features of lathes equipped with reverse to leadscrew.
Visual guide and instructions for lubricating all lathe components.
Lubrication and spindle speed selection for relieving operations.
Calculating gears for spiral fluted work and troubleshooting.