To Next PageTo Next Page
Need help?Do you have a question about the Loewe Vitros 6381 ZW and is the answer not in the manual?
General| Resolution | 3840 x 2160 (4K UHD) |
|---|---|
| Aspect Ratio | 16:9 |
| HDMI Ports | 4 |
| USB Ports | 3 |
| Smart TV | Yes |
| Built-in Wi-Fi | Yes |
| Bluetooth | Yes |
| Operating System | Loewe OS |
| HDR | HDR10 |
Essential safety guidelines and regulations for handling electronic devices and accessories.
Instructions for entering and navigating the service mode for adjustments and diagnostics.
Circuit diagrams for various control units like 88221, 88225, 88226, and 88227.
Circuit diagrams for tuners (e.g., 87222) and modules (e.g., AC3, VGA/IR).
List of spare parts for main boards and control units, including part numbers.
References to schematic and PCB diagrams for various components and boards.
Guidelines for handling sensitive components at MOS workstations and using protective packaging.
Mandatory safety warnings, regulations, and testing procedures for electronic devices.
Step-by-step instructions for removing the rear panel of the device.
Procedure for moving the chassis into a service-friendly position for repairs.
Instructions for preparing the signal board for repair, including cover removal.
Specific repair advice for the MediaPlus signal board, including EAROM handling.
Diagrams illustrating the process of removing the rear panel.
Diagrams showing how to position the chassis for service access.
Diagrams illustrating the cable connections between the basic and signal boards.
Wiring diagram showing connections for SAT tuners and DVB decoders.
Wiring details for SAT units and the TVO2 module on the MediaPlus chassis.
Wiring diagram for the SAT/Twin-SAT VI retrofit kit.
Instructions on how to enter the service mode using the remote control.
Explanation of remote control buttons used for service mode navigation.
Overview of system data, geometry settings, and option bytes within the service menu.
Details on adjusting option bytes and color settings in the service menu.
Guide to entering service mode and using the PC/TV programmer for adjustments.
Instructions for aligning geometric parameters like amplitude, position, and linearity.
Detailed alignment functions for picture geometry, including rotation and slope.
Procedures for adjusting horizontal and vertical amplitude, position, and symmetry.
Instructions for adjusting horizontal offset, cutoff, and white level settings.
Guidance on entering and saving data in option bytes for specific configurations.
Alignment procedures for Color VCO and Picture-in-Picture position settings.
Adjustments for contrast, subcontrast, and RC subsystem settings.
Analog alignment steps for operating voltage and focus.
Configuration options for bytes 0, 1, and 2, affecting tuner, EPG, and display modes.
Configuration options for bytes 3, 4, and 5, related to format, startup, and audio modes.
Configuration options for bytes 6, 7, and 8, covering HDLC, tuner, and system modes.
Navigating TV menus for program search, AV device connection, and settings.
How to access and use the main information menu via the remote control.
Menu modifications required after installing the SAT VI module.
Instructions for connecting a decoder and configuring speaker settings.
Operating video functions and navigating video-related menus.
Using TT and TV menus for program search and timer setup.
Using nexTView and EPG for program selection and recording.
Tips for operating the remote control, including menu navigation.
Explanation of buttons for navigating TV menus and information screens.
Detailed settings for picture, sound, program search, and locking.
Configuration options for connecting external AV devices like VCR, DVD, and Sat receivers.
Contact details for Loewe service centers across Europe.
Contact details for Loewe service centers outside of Europe.
