EasyManua.ls Logo

Lofrans Dorado - Windlass Maintenance; Scheduled Maintenance Program; Gipsy Care and Replacement

Lofrans Dorado
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
0$,17(1$1&(
USE OF THE YACHT (MONTHS)
LESS THAN 2 FROM 2 UP TO 6 MORE THAN 6 CHARTER
EVERY 3 MONTHS   $% $%
EVERY 6 MONTHS  $%  
EVERY 12 MONTHS $%& & & &'
EVERY 24 MONTHS  ' ' (
EVERY 36 MONTHS '(((
Follow strictly the maintenance
programme. Not meeting the
maintenance programme will cause
forfeiture of the warranty.
Disconnect power to the
anchor windlass before any
maintenance.
0DLQWHQDQFHSURJUDPPH
For obtaining the best performances and
the utmost efficiency of the anchor
windlass, it is necessary to follow
strictly the maintenance programme
indicated hereby.
A. Clean all external surfaces and
hidden points with fresh water and
remove all salt layers.
B. Grease the rotating parts.
Particularly, the main shaft threads and
clutch cones. Check for evidences of
corrosion and mechanical stresses.
C. Check the terminals of the electric
motor. Test the voltage drop at the
terminals.
D. Replace all gaskets.
E. Remove the anchor windlass from
the deck to clean the salt under the base
and seal again.
6 MAINTENANCE
6.2 Gipsy maintenance/replacement
1 By turning anticlockwise, remove
the gypsy through the manoeuvre
handle.
2 Slip off from the shaft the upper
clutch cone, the gipsy, and the lower
clutch cone.
3 Wash with running water. DO NOT
USE WATER UNDER PRESSURE.
4 Check that there is no evidence of
corrosion or mechanical stresses.
5 Reassemble by proceeding in the
reverse order, remembering to lubricate
threads and all moving parts with
grease.

Related product manuals