To Next PageTo Next Page
Need help?Do you have a question about the Loftek CXS 2200 and is the answer not in the manual?
General| Storage | MicroSD card (up to 128GB) |
|---|---|
| Video Compression | H.264 |
| Power Supply | DC 5V/1A |
| Resolution | 1920x1080 (Full HD) |
| Connectivity | Wi-Fi (802.11b/g/n) |
| Lens | 3.6mm |
| Network Protocols | TCP/IP, HTTP, DHCP |
| Operating Conditions | -4°F to 122°F (-20°C to 50°C) |
| IR Distance | Up to 20 meters |
Details the key features and operational capabilities of the IP camera.
Describes the physical design and external components of the IP camera.
Details the various ports and connectors on the IP camera.
Explains how to connect the IP camera to a network and ensure status lights.
Guides users on how to access the IP camera from a PC on the same or different LAN.
Instructions for configuring the IP camera's IP address to match the PC's network segment.
Step-by-step guide to access the camera via the web browser using network settings.
Instructions on configuring router settings for remote access to the IP camera.
Explains the use of Dynamic DNS for accessing the camera remotely.
Details on using the manufacturer-provided DDNS service.
Instructions for setting up and using third-party DDNS services.
Configuration options for network connectivity.
Setting the IP address, subnet mask, gateway, and HTTP port.
Steps to configure wireless network connection settings.
Configuration for ADSL connection, including username and password.
Instructions for enabling and using UPnP for automatic port forwarding.
Refers to section 6.2 for DDNS configuration details.
Setting up MSN Messenger for communication with the camera.
Configuration options for motion detection and alarm actions within the camera.
Configuring email notifications for alarm events and IP address changes.
Setting up FTP for capturing and sending images during alarm events.
Configuring custom alarm server settings and URL format.
Advanced configuration options for the camera.
Managing user accounts and their authority levels (Admin, Operator, Visitor).
Configuring and viewing multiple IP cameras simultaneously.
Adjusting LED indicator, PTZ center, patrol rounds, and PTZ rate.
Maintenance procedures for the IP camera.
Displays detailed information about the camera's hardware and firmware.
Setting the camera's clock and synchronizing with NTP or PC time.
Instructions for upgrading the system and application firmware.
Steps to restore the camera to its original factory settings.
Viewing logs of recent user access and activities.
