17
To avoid any potential hazard, you must follow
these instructions when you install your appliance.
The mains connection for this product must have an all pole
disconnection provided in the xed wiring in accordance
with the local wiring regulations.
• The kitchen area should be dry and equipped with
sucient ventilation.
• When installing the oven, easy access to all control
elements should be ensured.
• This is a built-in oven. Coating or veneer used on
tted furniture must be applied with a heat-resistant
adhesive (100°C). This prevents surface deformation or
detachment of the coating.
• Ensure that the cabinet is designed to be used with built-in
ovens.
• Once the oven is installed, x with the two screws
in the places shown in the diagram.
575
595
595
560
600
850
5 0
8 0
250
100
5 7 0
600
560
LBMFMX15_IB_RC_160920_grace.indd 17 20/9/16 5:53 pm
To Next Page
Loading...
