Need help?Do you have a question about the Logik Tilt Medium Bracket and is the answer not in the manual?
Read all warnings before assembly. Ensure qualified personnel, correct wall type, and safe load capacity are verified.
Mark wall using a level, drill holes with correct bit size and depth, and insert wall plugs as needed.
Securely mount the wall plate to wood stud or solid brick/concrete walls using appropriate screws and washers.
Attach adapter brackets to the TV, selecting correct screws based on TV back type (flat or recessed).
Hang TV onto wall plate with assistance, then adjust the tilt angle between 0° and 10°.
To Next Page
General