5
Store by wrapping cable around
ngers; place earphones
inside carrying case. To clean,
remove cushion and wipe with
a clean cloth.
www.logitech.com
620-003126.002
© 2010 Logitech. All rights reserved. Logitech, the Logitech
logo, and other Logitech marks are owned by Logitech
and may be registered. All other trademarks are the
property of their respective owners. Logitech assumes
no responsibility for any errors that may appear in this
manual. Information contained herein is subject to change
without notice.
iPod is a trademark of Apple Inc., registered in the U.S. and
other countries. Apple is not responsible for the operation
of this device or its compliance with safety and regulatory
standards. All other trademarks are the property of their
respective owners.
Hearing and Health is Critical!
Please review the safety guidelines
in the Important Information
Document.
Getting started with
Ultimate Ears
®
350
Noise-Isolating Earphones
logitech.com
ultimateears.com
facebook.com/ultimateears
twitter.com/ultimateears
Store your earphones
Troubleshooting
No sound• – ensure that the
3.5 mm earphone connector is fully
seated into the iPod or MP3 player
headphone jack.
Weak bass• – check ear cushion seal;
try another ear cushion size.
Detached ear cushions• – rmly
attach ear cushions to earphone
nozzle. See step 2 on reverse side.
Diminished sound quality• –
remove ear cushions, check for
blockage in nozzle, and wipe with a
clean cloth.
Missing ear cushions• – go to
www.logitech.com for replacements.
Product information:
www.logitech.com
Support: www.logitech.com/support
(see phone number below)
Product registration:
www.logitech.com/register
Protect your hearing: Read safety
guidelines in Important Information
Document.
To Previous Page
Loading...
