Logitech BRIO ULTRA HD PRO - CONNECTING THE WEBCAM VIA USB-A; SUCCESSFUL CONNECTION; DIMENSIONS

USB 2.0
USB 3.0
CONNECTING THE WEBCAM VIA USB-A
Plug the USB-C end into the webcam and the USB-A
connector into the USB-A port on your computer.
SUCCESSFUL CONNECTION
LED activity light will light up when the webcam
isinuseby an application.
WEBCAM:
Height x Width x Depth:
1.06 in (27 mm) x 4.02 in (102 mm) x 1.04 in (27 mm)
Cable Length: 7.2 ft (2.2 m)
Weight: 2.22 oz (63 g)
ATTACHABLE MOUNTING CLIP:
Height x Width x Depth:
0.75 in (19 mm) x 1.42 in (36 mm) x 2.48 in (63 mm)
Weight: 1.55 oz (44 g)
DIMENSIONS
www.logitech.com/support/brio
© 2020 Logitech. Logitech, Logi, 罗技 and the Logitech Logo are trademarks or registered
trademarks of Logitech Europe S.A. and/or its aliates in the U.S. and other countries.
Logitechassumes noresponsibility for any errors that may appear in thismanual.
Informationcontained herein issubject to change without notice.