Logitech BRIO - Connecting and Specifications; Connecting the Webcam via USB-A; Successful Connection Indicators; Webcam and Mounting Clip Dimensions

USB 2.0
USB 3.0
CONNECTING THE WEBCAM VIA USBA
Plug the USB-C end into the webcam and the USB-A
connector into the USB-A port on your computer.
SUCCESSFUL CONNECTION
LED activity light will light up when the webcam
isinuseby an application.
WEBCAM:
Height x Width x Depth:
1.06 in (27 mm) x 4.02 in (102 mm) x 1.04 in (27 mm)
Cable Length: 7.2 ft (2.2 m)
Weight: 2.22 oz (63 g)
ATTACHABLE MOUNTING CLIP:
Height x Width x Depth:
0.75 in (19 mm) x 1.42 in (36 mm) x 2.48 in (63 mm)
Weight: 1.55 oz (44 g)
DIMENSIONS
www.logitech.com/support/brio
© 2020 Logitech, Logi and the Logitech Logo are trademarks or registered trademarks of Logitech
Europe S.A. and/or its aliates in the U.S. and other countries. Logitech assumes noresponsibility
for any errors that may appear in thismanual. Information contained herein issubject to change
without notice.
WEB-621-001905.002