Need help?Do you have a question about the Logitech Conference Connect and is the answer not in the manual?
General| Battery Life (Talk Time) | 15 hours |
|---|---|
| Charging Time | 3 Hours |
| Battery Type | Rechargeable Lithium-ion |
| Acoustic Echo Cancellation (AEC) | Yes |
| Voice Activity Detector (VAD) | Yes |
| Noise Reduction | Yes |
| Video | Not applicable (audio-only device) |
| Connectivity | USB, Bluetooth |
| Compatibility | Mac |
| Battery Life (Video Conferencing) | Not applicable (audio-only device) |
| Microphone Frequency Response | 100 Hz |
| Microphone Coverage | 360-degree |
| Bluetooth Range | 30 m / 100 ft |
| Speakerphone | Yes |
| Acoustic Performance | Noise Reduction |
| Microphone Pickup Range | Up to 4 meters |
| Charging | USB |
| Included Accessories | USB cable |
| Audio | Full-duplex performance; Acoustic echo cancellation; Noise reduction technology; Ultra-wideband audio |
Connect the USB cable to the device and computer, and the power cable to the device and an outlet.
Power on the device, then press the Video conferencing mode button to activate the camera and microphone.
Ensure the Logitech Conference Camera is selected in video conferencing software settings if the built-in camera is used by default.
Exit the meeting room, power off the conference camera, and disconnect the power and USB cables.
Return the camera, cables, lens cover, remote, and user guide to the designated storage location.
To Next Page
