G920 Driving Force Racing Wheel FAQs 40
● Ventrilo — Assign a button to have a function in Ventrilo, if Ventrilo is installed
on your computer.
2. Click OK to assign the desired command to the button. The command’s name will be
visible over that button in the Steering Wheel screen.
Resetting buttons
To reset a single button command assignment:
1. From the Steering Wheel screen, navigate to the Profiles area at the top-right corner
of the LGS window.
2. Navigate to the specific profile for the button you wish to reset.
3. Right-click on the button you wish to reset and select one of the following options from
the pop-up menu that appears:
● Use Generic — Click on this option to revert the selected button assignment to
its generic function.
● Unassign — Click on this option to remove all assignments from the selected
button.
NOTE: You can also remove all assignments by dragging the current command from
the button to the trash icon (located at the bottom-right corner of the Commands
list).
To reset all button command assignments:
1. From the Profiles area at the top-right corner of the LGS window, navigate to the
profile for which you wish to reset all button assignments.
2. Right-click on the profile and click All G-keys from the pop-up menu that appears.
3. Select one of the following options from the next pop-up menu that appears:
To Next Page
Loading...
