G920 Driving Force Racing Wheel FAQs 7
Optimal cable routing
USB and pedal cables (1, 2) should be
routed through inner channels.
Power and optional shifter cables (3, 4)
should be routed through outer channels.
Cables may be wrapped multiple times
around cable management cleat to take
in slack.
Force feedback
Your Racing Wheel contains dual motors that will provide force feedback with supported
games and systems.
Note: Your racing wheel has an overheat protection circuit safeguard to protect it
under high-temperature operating conditions. In rare instances, force feedback
features may shut down during use while controls continue to operate. If this occurs,
allow the wheel to cool down and power it down by unplugging it. If this occurs frequently,
contact product support.
To Next Page
Loading...
