G923 TRUEFORCE Racing Wheel for Xbox and PC FAQs 22
4. You can also type the desired value by selecting the value and then using your
keyboard.
Leaving the slider at 50 will provide a linear 1:1 ratio of sensitivity. Between 51 and 100
will make the pedal more sensitive and between 1 and 49 will make it less sensitive.
● Force feedback turns off intermittently on G923 racing wheel
The G923 racing wheels have dual motors that provide force feedback on supported games
and systems. Both products contain an overheat protection circuit to safeguard them under
high-temperature operating conditions.
In rare instances, force feedback features may shut down during use, while the controls
continue to operate. If this happens, allow the wheel to cool down by using the following
steps:
1. Disconnect the wheel unit’s power adapter from the power source.
2. Disconnect the wheel unit’s USB connection from the game console or PC.
● Mount and secure the G923 racing wheel using built-in bolt mounting points
○ Wheel Unit
○ Pedal Unit
○ Cable Management
To Next Page
Loading...
